®
Case 580B Loader/Backhoe
Hydraulic Cylinder Seal Kits
With Model 35 Loader & Model 35 Backhoe
Online Product Catalog Cylinders Hoses - Coming Soon Pumps - Coming Soon Valves - coming Soon
           
All manufactures names
To obtain the correct seal kit, the cylinder must be identified to determine which type of piston is used in your application. Checking the face of the gland for stamped numbers can make identification to the two types given below. Click link to view cylinder images.
SP-type piston. The most common type piston used on the 580B was the "Split Piston". Cylinders with the split piston generally did not have numbers stamped in the gland nut and some have a grove machined in the face of the gland. Although if your gland does have a number, stamped in it, that starts with G3, it will be a cylinder with a split piston.
OP-type piston. Not as common on the 580B the other type of piston used was the "One Picec Piston". If a cylinder has been replaced it was most likely replaced with this updated type. These cylinders are stamped with a number in the face of the gland. If the stamped number starts with G10 it will be a cylinder with a one-piece piston.
*Note: Backhoe Stabilizer Cylinder tube bore diameter must be measured for proper identification.
Cylinder
Kit Number
 Description
Bore Diameter
Rod Diameter
Piston Type

Price

 Buy
Loader Lift 1543378C1 Kit, complete
3.00
1.50
33.00
Loader Lift 1543252C1 Kit, complete
3.00
1.50
17.00
Loader Tilt G109484 Kit, complete
2.50
1.50
20.00
Loader Tilt 1543253C1 Kit, complete
2.50
1.50
16.00
Hydra-Level 1543263C1 Kit, complete
3.00
1.75
21.00
Hydra-Level 1543262C1 Kit, complete
3.00
1.75
16.00
Loader Clam 1543263C1 Kit, complete
3.00
1.75
21.00
Loader Clam 1543262C1 Kit, complete
3.00
1.75
16.00
*Backhoe Stabilizer 1543383C1 Kit, complete
3.50
2.00
26.00
*Backhoe Stabilizer 1543271C1 Kit, complete
4.00
2.00
23.00
Backhoe Stabilizer 1543273C1 Kit, complete
4.00
2.00
18.00
Backhoe Swing 1543271C1 Kit, complete
4.00
2.00
23.00
Backhoe Swing 1543273C1 Kit, complete
4.00
2.00
18.00
Backhoe Boom G105528
 Kit
3.25
1.75
22.00
G33181 Wear Ring
7.00
Backhoe Boom 1543265C1 Kit, complete
3.25
1.75
19.00
Backhoe Bucket 1543383C1 Kit, complete
3.50
2.00
26.00
Backhoe Bucket 1543274C1 Kit, complete
3.50
2.00
16.00
Backhoe Dipper 1543271C1 Kit, complete
4.00
2.00
23.00
Backhoe Dipper 1543273C1 Kit, complete
4.00
2.00
18.00
Backhoe Dipper 1543378C1 Kit, complete
3.00
1.50
33.00
Backhoe Dipper Ext 1543252C1 Kit, complete
3.00
1.50
17.00
All manufactures names, numbers, symbols and descriptions are for reference purposes only. It is not implied that any part listed is the product of CNH or the Case Co. Equipment Parts Source, Inc. is not a representative, associated or affiliated with CNH or the Case Co.
1900 Parkway Drive
P.O. Box 51168
Casper, WY 82605-1168
Phone: 307-235-2119

inquire via e-mail
Copyright © Equipment Parts Source 2000 - 2007
Design by Equipment Parts Source, Inc.